HUMIDITY SOLUTIONS
Gas / Liquid / Temperature / Electronic Loads / Pressure
Overview
Humidify gas flow up to 100%RH at 10 SLPM and 85% RH up to 7,000 SLPM
Independent dewpoint temperature control of up to two humidification channels
Integrated safety: programable interlocks, rupture discs, redundant software or hardwired interlock controls
Fully automated and remote control with Fideris Test Suite™ software
Quick swappable modules for zero downtime during service or calibration
General Specifications
| HUMIDIFIER TYPE | BUBBLE | MEMBRANE |
| ACHIEVABLE RH% | Up to 100% | Up to 85% |
| MAXIMUM GAS FLOW | Up to 10 SLPM | Up to 7000 SLPM |
| TEMPERATURE RANGE | 1 - 100°C | 1° – 80°C |
| MAXIMUM OPERATING PRESSURE | 50 psig | N/A* |
| RUPTURE DISK | 75 psig | N/A |
| MAXIMUM CHANNELS | 2 | 2 |
| TEMPERATURE CONTROLLERS | Up to 6 | Up to 2 |
Electrical Requirements
| MAINS INPUT VOLTAGE | 115 VAC or 230 VAC |
| MAINS INPUT FREQUENCY | 50 - 60 Hz |
Back Panel Connections
| CONTROL POWER - RUN/STANDBY | 4 Position MTA |
| POWER INLET | IEC-320 |
| DATA CONNECTION | Ethernet |
| DI H₂O DRAIN | 1/4” Swagelok |
| WET VENT | 3/8” Swagelok |
| GAS INPUT CONNECTIONS | 3/8” Swagelok |
| HUMIDIFIED OUTLET CONNECTIONS | 1/4” Swagelok |
| HEATED TRANSFER LINE (HTL) INPUTS | Mini-type K |
| HTL SWITCHED RECEPTACLES | IEC-320 |
| DI H₂O SUPPLY | 1/4” Quick Connect | 3/8” Swagelok |
Physical Characteristics
| DIMENSIONS | 10U: 17.5” H x 19” W x 21” D | 5U: 8.75” H x 19” W x 21” D |
| SYSTEM WEIGHT | 100 lbs | 49 lbs |
| OPERATING CONDITIONS | 40-100°F; 85% RH non-condensing; indoor use only |
| CLEARANCE FOR OPERATION | Front: 6”, Back: 6”, Sides: 0”, Top: 0” |