ELECTRONIC LOADS
Gas / Liquid / Temperature / Humidity / Pressure
Overview
Fully programmable, self-contained, solid-state, load banks: air-cooled up to 1kW, water-cooled beyond 1kW
Patented design for ultra-low impedance operation in electrochemical testing
Compatible with AC impedance and frequency response analyzers (FRA)
10 built-in voltage monitoring inputs
Integrated safety: redundant software or hardwired interlock controls
Fully automated and remote control with Fideris Test Suite™ software
Quick swappable modules for zero down time during service or calibration.
General Specifications: Air-cooled
| TYPE | MOSFET variable resistance |
| AVAILABLE SHUNTS | Up to 1000 A |
| CURRENT RATING | 50, 100, or 1000 A |
| VOLTAGE RATING | 20, 50, or 100 V |
| POWER DISSIPATION | 100, 250, 500 W, or 1 kW |
| NOMINAL SHORT CIRCUIT RESISTANCE |
6 FET loads: < 6 mΩ (100 W) 12 FET loads: < 2 mΩ (250 W) 26 FET loads: < 0.5 mΩ (500-1000 W) |
| LOAD CAPACITANCE | < 25 pF |
| CURRENT ACCURACY | ± 0.15% full scale |
| VOLTAGE ACCURACY | ± 0.1% full scale |
| INDEPENDENT CELL MONITORING INPUTS | 10 |
| CORROSION PROTECTION | Critical components silver or gold-plated |
Back Panel Connection: Air-cooled
| CONTROL POWER - RUN/STANDBY | 4 Position MTA |
| DATA CONNECTIONS | Ethernet |
| CELL VOLTAGE INPUT | DB-25 Female |
| REFERENCE VOLTAGE INPUT | 4 pin AMP female circular plastic connector |
| LOAD CONNECTIONS | 5/16” bolt down terminals |
Physical Characteristics: Air-cooled
| SYSTEM WEIGHT |
12 FET: 13.5 lbs 26 FET: 40 lbs |
| OPERATING CONDITIONS | 40-100°F; 0-85% RH non-condensing; indoor use only |
| CLEARANCE FOR OPERATION | Front: 6”, Back: 8”, Sides: 0”, Top: 0” |