Power Supply for Alicat MFCs
Fideris offers connecting and power cables to be used with Alicat gas and liquid mass flow controllers.
PVPS24U: This is an unregulated 24 Vdc, 120VAC, selectable plug style wall adaptor. It can be used with any Alicat style flow controller.
The electrical connector on all Alicat units is female. Male electrical connecting cables can be ordered for a combination of the following purposes:
• To provide power to the unit from a customer supplied voltage source
• To access output and input signals in communication
• To activate remote tare
DC-61: The 8-pin circular mini-din connector cable is 6' long and has 1 male mating connector. The opposite end is blunt cut with color-coded wires.
DC-6RT: This is a right angle, 8-pin circular mini-din connector cable at 6' long with 1 male mating connector. The opposite end is blunt cut with color-coded wires. This cable is typically used when overall device height is critical.
DC-251: This 8-pin circular mini-din connector cable is 25' long and has 1 male mating connector. The opposite end is blunt cut with color-coded wires.
DC-62: The 8-pin circular mini-din connector cable is also 6' in length, but is provided with a male mating connector on both ends. It is a straight pin-to-pin cable. This cable is typically used with the LSPM or the BB9 accessories.
MD8DB9: This is a male 8-pin circular din to female DB9 adaptor cable. It is 6’ feet in length and is typically used to simplify connection direct to a PC.
IC-10: This is a 6-pin industrial style locking cable that is 10' in length and has 1 male mating connector. The opposite end is blunt cut with color-coded wires. This cable reduces available analog output signals to one parameter. This option is useful for industrial installations in which the cable must be securely connected to the device.
DB-15: The 15pin Dsub connector is a common connection for process control devices. The Dsub connector is installed in place of the standard 8 pin mini din that is normally used with the Alicat device.